Xerox DocuPrint N3225 System Administrator Manual page 76

Using the Menu System
Table 1.22 Ethernet Menu functions (continued)
Menu Item and Function
IP Address
Set the four byte IP address. The
available values are:
xxx.xxx.xxx.xxx
.
Where xxx = 000 to 255
This item only appears if IP Address
Res. is set to .
Static
For this item (after Step 3), Item
Up moves the cursor to the right
through the displayed IP address and
moves the cursor to
Item Down
the left. This allows you to change
characters within the string rather
than having to re-enter the entire
string.
With the cursor displayed under a
character, Value Up
the value of that character and Value
Down decrements the value.
1-68 System Administrator Guide
1. Press Menu Up
Down
2. Press Item Up
Down
3. Press Value Up
Down
4. Press Value Up
Down
of the character above the
cursor. The value is
incremented or decremented
by 1 each time the key is
pressed. Holding down Value
Up
causes continuous scrolling
through the values.
increments
5. To change other characters in
the IP address, press Item
Up
scroll right or left respectively
through the character string,
then press Value Up
Value Down
value of the character above
the cursor (as in Step 4).
6. When you have completed
setting the IP address, press
Enter
7. Press On Line
Keystrokes
or Menu
until you see:
or Item
until you see:
or Value
. You will see:
or Value
to change the value
or Value Down
or Item Down to
or
to change the
. You will see:
. You will see:
Display
Menus
Ethernet Menu
Ethernet Menu
IP Address
IP A ddr ess
xxx.xxx.xxx.xxx
IP A ddr ess
xxx.xxx.xxx.xxx
IP A ddr ess
xxx.xxx.xxx.xxx
Ethernet Menu
IP Address
Ready
Table 1.22 Page 9 of 12
=
=
=