Xerox DocuPrint N3225 System Administrator Manual page 103

Table 1.26 Novell Menu functions (continued)
Menu Item and Function
NDS Context
Set the NDS context string (from 0 to
127 characters in length). The
available values are:
Null
A - Z, 0 - 9, hyphen (-), period (.), and
underscore (_)
For this item (after Step 3), Item
Up moves the cursor to the right
through the displayed NDS Context
string and Item Down
cursor to the left. This allows you to
change characters within the string
rather than having to re-enter the
entire string.
With the cursor displayed under a
character, Value Up
the value of that character and Value
Down decrements the value.
From any cursor position, you
can null out (delete) to the end
of the string by selecting the
space character with Value
Up or Value Down
then pressing Enter
1. Press Menu Up
Down
2. Press Item Up
Down
3. Press Value Up
Down
4. Press Value Up
Down
of the character above the
moves the
cursor. The value is
incremented or decremented
by 1 each time the key is
pressed. Holding down Value
Up
causes continuous scrolling
increments
through the values.
5. To change other characters in
the NDS Context string, press
Item Up
Down
respectively through the
character string, then press
and
Value Up
.
Down
of the character above the
cursor (as in Step 4).
6. When you have completed
setting the NDS Context, press
Enter
7. Press On Line
Keystrokes
or Menu
until you see:
or Item
until you see:
or Value
. You will see:
or Value
to change the value
or Value Down
or Item
to scroll right or left
or Value
to change the value
. You will see:
. You will see:
Chapter 1: Configuring the Printer
Using the Menu System
Display
Menus
Novell Menu
Novell Menu
NDS Context
NDS Con tex t
xxx...xxx
NDS Con tex t
xxx...xxx
NDS Con tex t
xxx...xxx
Novell Menu
NDS Context
Ready
Table 1.26 Page 7 of 7
=
=
=
1-95