Xerox DocuPrint N3225 System Administrator Manual page 62

Using the Menu System
Table 1.18 Serial Menu functions (continued)
Menu Item and Function
Baud Rate
Set the baud rate for the serial port.
The available values are:
115200 9600*
57600 4800
38400 2400
28800 1200
19200 600
Binary PS
Enable or disable the binary mode of
PostScript for jobs received on this
port. The available values are:
Off*
On
The parameter applies to all protocols
and interfaces except the following:
Parallel, Serial, EtherTalk, TokenTalk.
EtherTalk and TokenTalk are always set
to Binary mode. Parallel and Serial
cannot be set to Binary mode.
1-54 System Administrator Guide
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item
Down until you see:
3. Press Value Up or Value
Down until you see:
4. Press Enter . You will see:
5. Press On Line . You will see:
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item
until you see:
Down
3. Press Value Up or Value
Down until you see:
4. Press Enter . You will see:
5. Press On Line . You will see:
Display
Menus
Serial Menu
Serial Menu
Baud Rate
Baud Ra te
New Value
Serial Menu
Baud Rate
Ready
Menus
PostScript Menu
PostScript Menu
Binary PS
Bina ry PS
New Value
PostScript Menu
Binary PS
Ready
Table 1.18 Page 3 of 3
=
=