Xerox DocuPrint N3225 System Administrator Manual page 220

Control Panel Messages
Table 5.2 Control Panel messages and corrective actions (continued)
Message
Tray 4 Empty
Tray 5 Empty
Tray n Lifting
V x.x
xx/xx/xx
Waiting...
Warming Up...
5-28 System Administrator Guide
Description/Corrective Action
This tray is no longer being used to print because it is empty. Refill the tray if
it is to be used again.
This tray is no longer being used to print because it is empty. Refill the tray if
it is to be used again.
The indicated tray has been refilled, is rising into position and will be soon
ready for printing.
This message appears when the printer is in Power ON diagnostics. The first
line contains the printer software version number. The second line contains
the creation date of this printer software version. None, if there is no failure
during Power ON diagnostics. After other diagnostic messages, the final
message will be that the printers is online and waiting for data.
The printer was busy processing data from a host but the print job was not
completed. This message appears until:
• Another print job is received.
• The Port Timeout expires.
• The last page timeout expires.
• The PostScript "waittimeout" expires.
The Fuser has not warmed up yet.This message disappears when the printer
is ready. The message displays at Power ON and may display after the cover
has been opened for some time or when the printer is exiting Power Saver
mode.
Table 5.2 Page 24 of 24