Using The 10-Bin Mailbox/Collator; Mailbox Sorter Modes; Printing To The Mailbox/Collator - Xerox DocuPrint N3225 System Administrator Manual

Using the 10-bin Mailbox/Collator

Using the 10-bin Mailbox/Collator

Mailbox Sorter
Modes
Printing to the
Mailbox/Collator
1-120 System Administrator Guide
The 10-bin Mailbox/Collator is an optional output device
available for the printer. It handles all supported paper
sizes, except A6 and envelopes, in 10 individually
addressable bins at up to 100 sheets per bin.
There are two different Mailbox/Sorter modes provided by
the 10-Bin Collator:
• Mailbox Mode: Each mailbox bin can be addressed
individually using the job destination functionality
contained in the printer driver.
• Sorter Destination Mode: The mailbox works like a
copier sorter when multiple sets are printed. When up
to 10 sets are requested, the first page is sent to Bin 1,
the second set to Bin 2, and so on.
If more than 10 copies are selected, the entire job is sent
to the Face Down Bin.
Using a printer driver, select a specific bin for the paper
output destination for your job, then print your job.
Selecting a bin enables you to send a job to that bin.
For information on setting a Mailbox bin as the printer's
default output bin, see page 1-43.