Xerox DocuPrint N3225 System Administrator Manual page 300

Finisher
6-58 System Administrator Guide
Open the access door on the side of the finisher
22
23 Slide the Staple Cartridge into the finisher until
it snaps into place. Then close the access door.
24 Reattach the printer's GFI power cord and
power ON the printer.
25 Print a Configuration Sheet (see Chapter 1 of
the Printer User Guide) and confirm that the
finisher appears in the "Installed Options"
section of the sheet.
If the finisher does not appear on the
Configuration Sheet, perform steps 1
through 5 of the next section,
"Removing the Finisher," then reinstall
the finisher and print another
Configuration Sheet. If the finisher still
does not appear on the sheet, contact
your Customer Service Center.
26 Install the printer drivers from the CD.