Print Quality Problems - Xerox DocuPrint N3225 System Administrator Manual

Print Quality Problems

Table 5.4

Print quality problems

Problem
Light/faint prints
Overall image is lighter
than normal.
Table 5.4 lists common print quality problems, the
possible cause, and recommended actions.
Possible Cause(s)
Toner Saver mode.
Toner level low/empty.
Damp paper stock.
Print Quality Problems
Corrective Action(s)
Turn off Toner Saver.
Remove the Laser Print Cartridge carefully
and vigorously shake it several times, then
re-install it. (This may help redistribute the
remaining toner before having to replace
the cartridge.) Refer to "Replacing the Laser
Print Cartridge" (page 4-2).
Replace paper stock.
Table 5.4 Page 1 of 8
Chapter 5: Troubleshooting 5-43