Tray Sequence - Xerox DocuPrint N3225 System Administrator Manual

Using the Menu System
Table 1.10 Tray Menu functions (continued)
Menu Item and Function

Tray Sequence

Set the sequence of trays used by the
printer when tray switching is
required. The available values are:
Off
MBF-1
†
MBF-1-2
MBF-4-5
MBF-4-5-1
MBF-4-5-1-2
††
MBF-4-5-1-2-3
†††
1-2
1-2-3
4-5-1
4-5-1-2
††††
4-5-1-2-3
4-1
4-1-2
4-1-2-3
† Default when no accessories are installed.
†† Default with High Capacity Feeder installed.
††† Default with Envelope Feeder installed.
†††† Default with Envelope Feeder and High Capacity
Feeder installed.
The first tray of a sequence is used
until it runs out of paper, at which
time the next tray in the sequence is
used (if it has the correct paper size
and type). See the section Automatic
Tray Switching for rules and
1-106
examples of usage.
Only installed tray options will
appear. If the value is set to Off,
the printer will print from the
requested tray only, even if the
other trays contain the correct
stock.
1-26 System Administrator Guide
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item
Down until you see:
3. Press Value Up or Value
Down until you see:
4. Press Enter . You will see:
5. Press On Line . You will see:
Display
Menus
Tray Menu
Tray Menu
Tray Sequence
Tray Se que nce
New Value
Tray Menu
Tray Sequence
Ready
Table 1.10 Page 6 of 7
=