Xerox DocuPrint N3225 System Administrator Manual page 37

Table 1.12 PCL Menu functions
Menu Item and Function
Font Number
Set the default font in PCL. The
available values are:
0* - 999
These numbers are assigned by the
printer and should not be confused
with the user defined ID numbers
associated with font downloading
(creation).
The font number changes
incrementally to the next valid ID
each time either Value Up
is pressed. Holding
Value Down
down Value Up or Value
Down causes continuous scrolling
through the font numbers.
(Accelerated scrolling may be affected
by the time taken to ascertain the
next possible value.)
Keystrokes
1. Press Menu Up
Down until you see:
2. Press Item Up
Down until you see:
3. Press Value Up
Down until you see:
4. Press Enter
5. Press On Line
or
Using the Menu System
or Menu
Menus
PCL Menu
or Item
PCL Menu
Font Number
or Value
Font Nu mbe r
New Value
. You will see:
PCL Menu
Font Number
. You will see:
Ready
Table 1.12 Page 1 of 5
Chapter 1: Configuring the Printer
Display
=
1-29