Xerox DocuPrint N3225 System Administrator Manual page 64

Using the Menu System
Table 1.20 USB Menu Functions
Menu Item and Function
Port Enable
Enable or disable the USB port.
The available values are:
On*
Off
Port Timeout
Set the time for determining when to
end an incomplete print job and poll
the next port in the polling sequence.
The available values are:
5 - 300 seconds (30*)
This item also causes an implicit job
end such as Control D in PostScript or
<ESC> E in PCL, and invokes the
emulation functions associated with
this action (e.g., formfeed, reset, etc.).
The time changes incrementally by 1
second each time either Value Up or
Value Down is pressed. Holding
down Value Up or Value Down
causes continuous scrolling through
the values.
1-56 System Administrator Guide
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item
Down until you see:
3. Press Value Up or Value
Down until you see:
4. Press Enter . You will see:
5. Press On Line . You will see:
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item
Down until you see:
3. Press Value Up or Value
Down until you see:
4. Press Enter . You will see:
5. Press On Line . You will see:
Display
Menus
USB Menu
USB Menu
Port Enable
Port Enable =
New Value
USB Menu
Port Enable
Ready
Menus
USB Menu
USB Menu
Port Timeout
Port Timeout =
New Value
USB Menu
Port Timeout
Ready
Table 1.20 Page 1 of 2