Xerox DocuPrint N3225 System Administrator Manual page 297

Pass the Guide Rail under the center of the
10
printer from left to right as shown. The left side
bracket (#1) should be at the left side of the
printer, while the right side bracket (#2) should
be at the right side of the printer.
Make sure the Guide Rail is parallel to the front
of the printer.
Do not tip the printer when you attach
the Guide Rail brackets.
11 At the left side of the printer, align the #1
bracket with the third hole from the front, lift it
over the printer's plastic cover panel and hook
its tab in the hole.
12 At the right side of the printer, align the #2
bracket with the third hole from the front and
slide it upwards between the printer's plastic
cover panel and frame until it snaps firmly into
place.
Chapter 6: Installing and Removing Printer Options
Finisher
6-55