Xerox DocuPrint N3225 System Administrator Manual page 223

Table 5.3 Diagnostic LED flash sequences (continued)
Flash Sequence
5 flashes — 1 second — 5 flashes...etc.
6 flashes — 1 second — 6 flashes...etc.
7-11 flashes — 1 second — 7-11 flashes...etc.
Diagnostic LED Flash Sequences
Description/Corrective Action
Resolution enhancement self-test fault. Contact
your Customer Support Center.
Communications ports internal loopback test fault.
Contact your Customer Support Center.
Slot DIMM1 - DIMM5 fault.
• 7 flashes indicate DIMM1 fault.
• 8 flashes indicate DIMM2 fault.
• 9 flashes indicate DIMM3 fault.
• 10 flashes indicate DIMM4 fault.
• 11 flashes indicate DIMM5 fault.
Perform the corrective actions listed under
to in Table 5.2 on page 5-5 to replace
010 5
DIMM1 through DIMM5.
Chapter 5: Troubleshooting
0 101
Table 5.3 Page 2 of 2
5-31