Remove paper input Trays 1, 2 and 3 and pull out Trays 4
20
and 5.
Make sure trays 4 and 5 are all the way out.
Do not place the trays on carpet; place them on a
hard surface.
21
Locate the feedrolls for Tray 1 and replace the lower
feedroll as shown in Steps 22 and 23.
Remove the old feedroll by (1) pulling up on the amber
22
tab and (2) sliding the feedroll off the spindle. Make sure
(3) no additional parts come off with the feedroll.
23
Install the new feedroll by (1) pushing it onto the spindle
until (2) the amber tab clicks into place.
Chapter 4: Maintaining the Printer
Installing the Maintenance Kit
4-15