10-bin Mailbox/Collator
6-32
System Administrator Guide
Remove Tray 2 and remove the brackets. Then replace
12
Tray 2.
13
With two people, lift the printer up and away from the
Mailbox/Collator support base. Set the printer down in its
new location.
14
Reattach the GFI power cord and interface cable to the
printer.
15
Power ON the printer.
16
Print a Configuration Sheet (see page 3-91) and confirm
that the Mailbox/Collator no longer appears in the upper
right section of the Configuration Sheet under "Installed
Options."