Inter-Tel Axxess User Manual page 81

To set up remote messaging:
1. Access your mailbox as described on
2. Press
software, skip this step.)
3. Press
NOTE:
4. Press
prompt tells you what the cascade's current status is.
5. Do one of the following:
•
To program a cascade level: Press
wish to program (1-9). You then have the following options:
— To enable or disable the cascade level: Press
— To set up or change an extension or telephone number: Press
— To set up or change a pager number: Press
•
To set up time of day for notification: Press
want the message notification to start and stop. Enter the times with two dig-
its for the hour and two digits for the minutes (e.g., 0915 = 9:15). If entering
the time in 12-hour format, you are prompted to press
2
NOTE:
the same.
•
To set up the days of the week for notification: Press
of the following:
— Press
— Press
— Press
•
To select all or priority-only message notification: Press
1
6. Either select another option, as described above, or press
) key to save the settings and exit.
Axxess Desktop SoftPhone User Guide
to select the Personal Options Menu. (If using version 5.0 or earlier
4
.
5
This option is not available if you do not have Remote Messaging enabled.
to set up a primary cascade or press
1
level until a notification number is programmed.)
press for an extension number or
1
enter the number.
for PM.
For 24-hour notification, program the starting and ending times to be
for Monday-Friday.
1
for all days.
2
to select individual days. You are prompted to press digits 1-7
3
which correspond to the days Sunday through Saturday.
for all messages or
2
page 48.
to set up an alternate cascade. A
2
and enter the number of the level you
1
for an outside number. Then
2
3
2
for priority messages only.
. (You cannot enable the
1
. Then
2
. Then enter the number.
. Then enter the time you
for AM or press
1
. Then select one
3
. Then press
4
or press the minus (-
#
67