Programming Remote Feature Access; Remote Access Password; Remote Feature Access - Inter-Tel Axxess User Manual

P
ROGRAMMING
If you are away from your desk and forgot to put your phone in DND, don't worry.
With the Remote Feature Access, you can place your phone in DND or forward calls
from any other phone on the system. And, if you have a special dial-up line, you can
access your phone features from an outside line.

Remote Access Password

Before you use Remote Feature Access, you should program a password, as described
below.
To change the password from your phone:
1. Enter
2. Enter your current password, followed by
NOTE:
3. Enter the new password followed by
4. Enter the new password again for verification followed by
mation tone.
To change the station password using remote programming, see the following section.

Remote Feature Access

To access your phone from another phone:
1. EITHER, Call your Direct Inward System Access (DISA) number (provided by
your System Administrator). If required, enter your password.
OR, Use any phone on the system.
2. Enter
3. Enter your extension number.
4. Enter your password followed by
tures.
To change the station password using Remote Programming:
a. Enter
b. Enter the new password, followed by
c. Enter the new password again for verification, followed by
To turn on DND:
a. Enter
b. Enter message number (01-20) and the optional second-line message text.
To turn off DND: Enter
78
R F
EMOTE EATURE
.
3 9
2
Your extension number is your password at default.
.
3 5 9
.
3 9 2
.
3 7 0
3 7
A
CCESS
.
#
. You hear a confirmation tone.
#
. You can now use any of the following fea-
#
.
#
.
1
Axxess Desktop SoftPhone User Guide
. You hear a confir-
#
.
#