Software Installation; Installing The Desktop Softphone - Inter-Tel Axxess User Manual

S I
OFTWARE NSTALLATION
Software Security Key: The software license for Desktop SoftPhone is controlled by
the use of a software security key. Before installing the Desktop SoftPhone, you must
install a software security key. This security key is a small device that must be
attached to your PC's parallel or USB port to fully enable the Desktop SoftPhone soft-
ware. Without the security key, the software will not work.
To install the security key:
Attach the appropriate end of the device to a parallel or USB port on your PC.
NOTE:
The security key does not affect the functionality of the parallel port itself. Any
device that you would normally connect to the parallel port can also be connected
through the security key.

Installing the Desktop SoftPhone

The Desktop SoftPhone software allows you to install Desktop SoftPhone, DTI
Server, and JRE version 1.3.1.
NOTE:
The following instructions assume that Windows 95, 98, NT, ME, or 2000 is
installed on your PC and that you are familiar with Windows procedures.
To install the Desktop SoftPhone:
1. Before you begin, make sure you know:
•
The extension you wish to control.
•
The IP address and port of the connection to the CP Server, if using a TCP/IP
connection.
•
The keyset extension password.
2. Insert the Desktop SoftPhone software CD-ROM into its drive.
3. Run Setup.exe. Follow the instructions on the window.
4. At the Welcome window, click Next to continue.
Axxess Desktop SoftPhone User Guide
3