NOTE:
Unlike the pre-programmed feature keys, the cus-
tomized keys cannot be reviewed on the LCD. Therefore,
the Review option is grayed out, as shown on the right.
To close the keymaps:
Click Close in the DSS Map option menu.
Override Trunk Name
This Override Trunk Name option allows you to specify whether or not the caller
number, Automatic Number Identification (ANI) or Caller ID, overrides the trunk
name (trunk's username) when the caller name is not available. This flag is enabled
by default.
To enable or disable this option:
Check or uncheck Override Trunk Name in the option menu.
TCP/IP Settings
The TCP/IP Settings option allows you to specify the IP address, port number, exten-
sion number, and the keyset password when connecting to the DTI Server. The default
values are as follows:
•
IP Address: The local host address or 0.0.0.0
•
Port Number: 4000
•
Extension Number: 00000
•
Password: 12345678
When you are finished entering the information, do one of the following:
•
Connect: Initiates a connection to the DTI Server using the settings in the text
field.
•
Cancel: Exit the TCP/IP Settings dialog box without changing the settings.
NOTE:
If you entered an invalid IP address, an error message appears. If this occurs,
enter the correct IP address and click
22
Connect
.
Axxess Desktop SoftPhone User Guide