Using Account Codes - Inter-Tel Axxess User Manual

U A
SING CCOUNT
If your telephone system is programmed to use the Station Message Detail Recording
(SMDR) feature, you might be required to enter account codes when you place a call.
These codes add information to phone record reports that the system will periodically
print.
There are three types of account codes:
•
Standard account codes are automatically entered into the SMDR report when-
ever you place a call.
•
Forced account codes must be dialed before you can place an outside call.
•
Optional account codes can be entered at any time during a call.
NOTE:
Your System Administrator can tell you which types of account codes are used
on your telephone system.
To enter an optional account code:
1. Click
2. Enter the optional account code. If the account code is not immediately accepted,
click
#
To set an account code for all calls placed from your phone:
Enter
3
accepted, click
from your phone until it is disabled.
To disable the code:
Enter
3 9
Axxess Desktop SoftPhone User Guide
C
ODES
and enter
SPCL 3 9
or press the minus (-) key.
and then the account code. If the account code is not immediately
9 1
or press the minus (-) key. This code will be used for all calls made
#
again and then click
1
.
0
or press the minus (-) key.
#
75