Table of Contents
Advertisement
TANDBERG MPS User Manual
. SIP Status
Figure 4‑7. ��I� �����u�
Mode
Shows if the SIP service is enabled or not.
Server status:
Show status towards the configured SIP server i.e. whether or not the MPS can find a server
Possible states are:
INACTIVE
SIP
not
use
server
in
DNS FAILED
DNS not set, external DNS server not found or SIP server address not found at DNS server
TIMEOUT
SIP server not answering.
UNABLE CONNECT TCP
Unable to connect to SIP server on TCP
ACTIVE,
Normal case, when server is found.
UNKNOWN
Server Address
Shows the connected SIP server address
If no server is selected, the normal state will be "off"
D13373.04
Advertisement
Table of Contents
