Cd-Rom Or Dvd-Rom Drive (Ide); Tape Drive; Audio - Compaq AP400 Maintenance And Service Manual

CD-ROM or DVD-ROM Drive (IDE)

Error Code
3301-xx
3305-xx
6600-xx
6600-xx
6605-xx
6608-xx
6623-xx

Tape Drive

Error Code
1900-xx
1901-xx
1902-xx
1903-xx
1904-xx
1905-xx
1906-xx

Audio

Error Code
3206-xx
CD-ROM and DVD-ROM Drive (IDE) Test Error Codes
Description
Drive read test failed.
Drive seek test failed.
ID test failed.
ID test failed.
Read test failed.
Controller test failed.
Random read test failed.
Tape Drive Test Error Codes
Description
Tape drive ID test failed.
Tape drive servo test failed.
Tape drive format or format verification test
failed.
Tape drive sensor test failed.
Tape drive BOT/EOT test failed.
Tape drive read test failed.
Tape drive write/read/compare failed.
Audio Test Error Codes
Description
Audio System Internal Error.
Table 4-20
Recommended Action
The following steps apply to error codes error codes
3301-xx through 3305-xx and 6600-xx through
6623-xx:
1. Replace the CD media and retest.
2. Check the jumper settings on the drive.
3. Verify that the speaker is connected.
4. Check and/or replace the power and signal cables and
retest.
5. Replace the drive and retest.
Table 4-21
Recommended Action
The following steps apply to error codes 1900-xx
through 1906-xx:
1. Replace the tape cartridge and retest.
2. Check the switch settings and terminations on the tape
drive.
3. Check and/or replace the signal cable and retest.
4. Replace the tape drive and retest.
5. Replace the system board with tray and retest.
Table 4-22
Recommended Action
Replace the system board with tray and retest.
Compaq Professional Workstation AP400 Maintenance and Service Guide
4-23