Compaq AP400 Maintenance And Service Manual page 118

If Switch 1 on SW1 is off, the Setup Password is enabled, and the "Setup Password" option for
the Smart Cover Sensor setting is selected, the workstation is operating under maximum
security. If the cover is removed for any reason while the maximum security setting is in effect,
the workstation will pause during the startup process. The startup process will not continue
unless the Setup Password is entered.
To service the workstation, you may want to disable the Smart Cover Sensor. (If the feature
remains enabled, you may be required to enter a Setup Password upon restarting the
workstation.)
To enable or disable the Smart Cover Sensor, see the following table.
SW1-S1 Setup Password
Setting
On Enabled
On Enabled
On Enabled
On Enabled
On Enabled
On Enabled
On Disabled
On Disabled
On Disabled
On Disabled
Off Enabled
Table 5-4
Smart Cover Sensor
Smart Cover Cover Removed
Sensor
Disabled Yes
Disabled No
Notify user Yes
Notify user No
Setup Yes
Password
Setup No
Password
Disabled Yes
Disabled No
Notify user Yes
Notify user No
Disabled Yes
Compaq Professional Workstation AP400 Maintenance and Service Guide
5-13
Message Displayed
No message displayed. No Setup
Password required.
No message displayed. No Setup
Password required.
Cover removed message displayed.
No Setup Password required. Press
F1 to continue startup.
No message displayed. No Setup
Password required.
Cover removed message displayed.
No Setup Password required. Press
F1 to continue startup.
No message displayed. No Setup
Password required.
No message displayed. No Setup
Password required.
No message displayed. No Setup
Password required.
Cover removed messaged displayed.
No Setup Password required. Press
F1 to continue startup.
No message displayed. No Setup
Password required.
No message displayed. No Setup
Password required.
Continued