Compaq Insight Manager - Compaq AP400 Maintenance And Service Manual

The following table lists the various keyboard light combinations, as well as the meaning and
action associated with each combination.
Num Caps Lock
Lock
OFF
ON
OFF
ON

Compaq Insight Manager

Compaq Insight Manager is a client/server software application you can use to remotely manage
and receive information about Compaq computers. Insight Manager remotely gathers
information about workstations needing service; for example, Insight Manager can inform you if
workstation components are experiencing failure or prefailure errors.
NOTE: Compaq Insight Manager requires the installation of Insight Agents for Windows NT on
the Compaq Professional Workstation AP400 and the installation of the Insight Manager console
on a computer used as a management console. If you have Windows NT Workstation, use only
Windows NT agents of the Compaq Management CD. The Agents and the console are provided on
the Compaq Management CD. Before installing the Insight Agents on the workstation, be sure to
install SNMP service from the Microsoft Windows NT Workstation CD.
Compaq Insight Manager provides the following features to help you support the
Compaq Professional Workstation AP400:
Remote alerts for Pentium II or Pentium III processor prefailure, ECC DIMM memory
single-bit error prefailure, and SCSI disk drive prefailure notification
Alerts logged to the local Windows NT Event Log (logged by the Insight Agents)
Asset and configuration information collected into a database and accessed by the Insight
Manager console for remote tracking of workstation assets and configurations
Print configuration (similar to INSPECT) reports at the Insight Manager console for
remote workstations
Keyboard Lights
Scroll
Lock
ON OFF
System requires Setup Password.
Enter the Setup Password. The light remains turned on until you enter a valid
Setup Password.
OFF OFF
System could not start from diskette because the Flash Recovery diskette is not
present, is bad, or the drive is not ready.
Insert a valid Flash Recovery diskette, turn the power off, then turn the power
on.
OFF ON
ROM upgrade failed.
Try another ROMPaq diskette. If the light remains turned on, contact Compaq
customer support.
ON ON
ROM upgrade successfully completed.
Turn power off and back on to resume normal system operation.
Table 4-28
Meaning and Required Action
Compaq Professional Workstation AP400 Maintenance and Service Guide
4-31