Windows Nt Workstation Password - Compaq AP400 Maintenance And Service Manual

5-8 System Security
Deleting a Power-on Password
To delete the Power-on Password:
1. Turn on the workstation.
When the key icon (
current password /
where the slash (/) may be substituted with an alternate delimiter character specific to the
keyboard you are using.
2. Press Enter.
Completing this procedure deletes the password until you establish a new one through Security
Management.
NOTE: For a list of applicable delimiter characters, see "National Keyboard Delimiter
Characters" later in this chapter.
Bypassing the Power-on Password
To bypass and clear the Power-on Password on SW1, set switch 1 to the ON position.
To re-establish the Power-on Password, set switch 1 to the OFF position.
See Chapter 6, "Jumper and Switch Information," for additional information and illustrations.

Windows NT Workstation Password

To establish a password in Windows NT Workstation:
1. Click Start, Programs, Administrative Tools.
2. Click User Manager, then follow the instructions to set a new password for "new user."
) appears, type: