Compaq AP400 Maintenance And Service Manual page 89

7. Follow the instructions on the screen as the diagnostic tests are run on the devices. When
the testing is complete, the test option menu is displayed again.
8. Exit to the Compaq Utilities menu.
View System Information (INSPECT)
The View System Information (INSPECT) utility provides information about the system once it
has been configured, including:
System
Contents of the operating system startup files
System ROM
System storage
System ports
Current memory configuration
ROM version
Type of processor and coprocessor
Diskette, CD-ROM, DVD-ROM, and hard drives
Active printer and communications interfaces
Modem
Keyboard
Graphics
Windows files
Network status
Miscellaneous
To run INSPECT, follow these steps:
1. Access the Compaq Utilities menu by restarting your workstation and pressing F10 when
you see the words "F10=Setup" in the bottom-right corner of the screen. Select the
desired language when prompted. Then press Enter to bypass the title and welcome
screens.
2. Select the View System Information (INSPECT) from Compaq Utilities menu, then press
Enter.
Create a Diagnostics Diskette
This option allows you to create both Setup or Diagnostics diskettes from the diagnostics
partition. To create the diskettes:
1. Turn on or restart the workstation. If Windows NT Workstation is running, click Start,
Shut Down, Restart the computer.
Compaq Professional Workstation AP400 Maintenance and Service Guide
4-17