Compaq AP400 Maintenance And Service Manual page 40

5. Disconnect the cables from the back of the diskette drive.
Figure 3-21. Disconnecting the cables from the diskette drive
6. Remove the diskette drive front and rear retaining screws.
7. Pull the diskette drive straight out of the drive cage.
Figure 3-22. Removing the diskette drive
To replace the diskette drive, the drive cage, and reassemble the workstation, reverse the above
steps.
CAUTION:
damage the internal components of the drive.
Use only 3/16-inch or 5-mm long screws. Longer screws can
Compaq Professional Workstation AP400 Maintenance and Service Guide
3-21