To Stop Scanning/Printing - Konica Minolta bizhub PRO C5501 User Manual

Before making copies
8.6

To stop scanning/printing

This section describes how to stop the job currently in process (scanning, printing, or both of scanning and
printing).
To stop scanning/printing
0 This procedure is effective only for the job in progress. To stop reserved jobs on standby, operate on
the Job List Screen. See Section 14 for details.
1
Press [Stop] on the control panel while the current job is in
progress.
– With the popup menu displayed right after pressing [Start]
for scanning the original of reserve job, the current job
cannot be canceled even if [Stop] is pressed. According to
the procedure on page 8-20, touch an appropriate key on
the popup menu to clear it.
The current machine operation of the selected job will be
suspended, and the popup menu will be displayed on the
Copy Screen.
2
Touch the desired key on the popup menu.
– The popup menu will vary according to the job in progress.
Both scanning and printing are in progress
% Touch [Stop Job] to cancel the job, or touch [Continue] to complete the job.
Reminder
Touching [Stop Job] will delete all the scanned data.
bizhub PRO C5501
8
8-17