To Stop Scanning/Printing - Konica Minolta bizhub pro 1050 User Manual

To Stop Scanning/Printing

Follow the procedure below to stop scanning or printing.
This procedure is effective only for the job in progress. To stop the reserved
jobs on standby, operate on the Job List Screen. See p. 10-2 for details.
1.
Press [Stop] while the current job is in progress.
With the popup menu displayed right after pressing [Start] for scanning
reserve job, the job cannot be canceled even if [Stop] is pressed. According to
the procedure on p. 8-20 touch an appropriate key on the popup menu to clear
it.
.
The current machine operation of the selected job will be suspended, and
the popup menu will be displayed on the Copy Screen.
2.
Touch the desired key on the popup menu.
The popup menu will vary according to the job in progress.
Both scanning and printing are in progress:
Touch Stop Job to cancel the job, or touch Continue to complete the job.
Touching Stop Job will delete all the scanned data.
8-18