12
12.4
Output Modes Using Folding Unit FD-501
Using Folding Unit FD-501, the following punch/folding patterns are
available:
Punch: Punches 2 or 4 holes in printed sheets for filing purposes. Specify the
desired punch position (left/right/top) according to the original set direction.
Folding: Six folding types are available - Z-Fold, Tri-Fold-in, Tri-Fold-out,
Double Parallel, Gate Fold, and Half Fold. Specify the print side (outside or
inside) for each folding mode except Z-Fold.
80 mm
80 mm
12.4.1 Punching File Holes in Copies
Copies will be punched in this mode. Follow the procedure below to select
2- or 4-hole punch and punch position.
!
Detail
For detailed specifications, see page 3-5 and page 7-7.
Procedure
1
Position the original.
2
Touch [Punch] on the Copy Screen.
–
Punched sheets will be delivered to the primary (main) tray. The
Output Application icon shows the number of punch holes and
punch position currently selected.
12-18
Tri-Fold-out
Z-Fold
Tri-Fold-in
Double Parallel
Output Applications
Half Fold
Gate Fold
bizhub PRO C6500