Bag E - Team Losi XXX-NT Adam Drake Edition Owner's Manual

Figure 62
126
!
Step 1. Place one shock O-ring (126) into the cartridge body
(127), making sure that the O-ring (126) sits flat on the bottom of
the cartridge body (127).
!
Step 2. Insert the cartridge spacer (128) into the cartridge
body (127) followed by a second O-ring (126).
!
Step 3. Once the second O-ring (126) is inserted, and is flush
with the top of the cartridge body (127), "snap" the cartridge cap
(129) onto the cartridge body (127).
!
Step 4. Make four cartridge assemblies.
*NOTE: Cartridges in some kits may be pre-assembled at the
factory.
Figure 63
130
!
Step 5. Place a drop of shock fluid (132) on the grooved end
of each shock shaft [front (130), rear (131)] and slide a cartridge,
hex end first, down the shock shaft (130), (131) toward the threads.

BAG E

128
131
2 7
126
127
Figure 62
130 131
Figure 63
129
128