Team Losi XXX-NT Adam Drake Edition Owner's Manual page 26

Figure 54
114
178 178
!
Step 5. Thread a 3/8" ball stud (38) into the inner hole in the right
rear hub (112) from the side opposite the letter ('L' and 'R') designating
left and right. Place a "foam thing" (56) over the ball stud (38).
!
Step 6. Press a 3/16" x 3/8" bearing (114) into the inside of the rear
hub (112). Slide the rear axle (109), from the inside, through the bear-
ing (114).
!
Step 7. Slide the center bearing spacer (115) over the axle and
against the bearing (114). Slide the second bearing (114) over the
axle and press it into the outside of the rear hub (112).
!
Step 8. Place a rear axle spacer (116) over the rear axle, against
the outside bearing (114). The small side of the spacer (116) should
be positioned against the outside bearing (114).
!
Step 9. Secure the rear axle (109) and spacer (116) by press-
ing a 1/16" x 7/16" pin (117) through the small hole in the rear
axle (109). The pin (117) should be centered in the rear axle (109).
Figure 55
31
!
Step 10. Slide a suspension ball (121) over a 4-40 x 1/2" cap
head screw (31) and thread it into the inner shock mount hole on the
right rear suspension arm (118) from the back side.
!
Step 11. Slide an outer rear hinge pin (51) partially through
the outside of the right rear suspension arm (118) from the rear.
Slide a plastic rear hub spacer (120) over the pin (51) and against
the rear portion of the suspension arm (118).
!
Step 12. Place the right rear hub (112), marked 'R', (ball stud
facing forward) between the outer rails of the suspension arm (118),
against the spacer (120). Slide the hinge pin (51) partially through the
hub (112).
!
Step 13. Insert another rear hub spacer (120) (not shown in
Figure 55) between the rear hub (112) and the forward rail of the
suspension arm (118). Slide the hinge pin (51) through both sides
of the suspension arm (118), the rear hub (112), and both spacers
(120). Secure the hinge pin with two 1/8" E-clips (46).
!
Step 14. Repeat Steps 1-13 for the left suspension arm (119)
and left hub (113).
BAG D (Continued)
115 116 117
51 46
114
116
121
31
51
2 3
109
178
114
56
112
115
Figure 54
118
120
46
Figure 55
117
112 112