Execute the showlogs command to identify the component requiring
maintenance.
XSCF> showlogs error
Confirm the hardware and software configurations.
Stop the entire system.
Execute the replacefru command to release the chassis requiring maintenance
from the system.
XSCF> replacefru
Remove all the power cords from the PSU backplane unit of the chassis
requiring maintenance.
Note -
14.4
Removing the PSU Backplane Unit
Caution -
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ・ February 2014
272