XSCF> poweron -p 0
6.4
Starting the Entire System
■
■
Check that the XSCF STANDBY LED on the operation panel is on.
Note -
Log in to the XSCF shell.
Switch the mode switch on the operation panel to Locked mode.
Note -
Execute the showstatus command to confirm that there is no problem with
the FRU after the completion of maintenance.
XSCF> showstatus
Execute the showhardconf command to check the hardware configuration
and the status of each component.
XSCF> showhardconf
SPARC M10-4S;
+ Serial:2081229003; Operator_Panel_Switch:Service;
+ System_Power:On; System_Phase:Cabinet Power On;
Partition#0 PPAR_Status:Running;
BB#00 Status:Normal; Role:Master; Ver:2050h; Serial:2081229003;
+ FRU-Part-Number:CA07361-D202 A0 ;
+ Power_Supply_System: ;
+ Memory_Size:320 GB;
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ・ February 2014
78