Fujitsu SPARC M10-4 Service Manual page 189

XSCF> setdate -s 102016592013.00
Start the entire system.
Close the rack door.
When the system is configured with a hardware RAID
Connect all the power cords to the PSU backplane unit of the chassis
requiring maintenance.
Note -
Return to the operation of the XSCF firmware replacefru command to confirm
that the chassis has been incorporated into the system.
Execute the diagxbu command to diagnose the crossbar cables.
XSCF> diagxbu -y -b 00 -t 01
Execute the restoreconfig command to restore the XSCF setting information
only when the CPU memory unit lower in a singe-chassis configuration has
been replaced.
Chapter 7 Maintaining the CPU Memory Units 165