Remove all the power cords from the PSU backplane unit of the chassis
requiring maintenance.
Note -
24.3.2
System-stopped maintenance
Open the rack door.
Log in to the XSCF shell.
Execute the showlogs command to identify the component requiring
maintenance.
XSCF> showlogs error
Confirm the hardware and software configurations.
Power off all the physical partitions.
Execute the replacefru command to release the chassis requiring maintenance
from the system.
XSCF> replacefru
Remove all the power cords from the PSU backplane unit of the chassis
requiring maintenance.
Note -
Chapter 24 Maintaining the Crossbar Cables (Electrical)
375