Pull the operation panel forward to remove it.
Note -
15.5
Installing the Operation Panel
15.5.1
Installing the operation panel
Set the BB-ID of the operation panel to the value prior to the start of
maintenance.
Place the operation panel in the mounting position and then tighten one
screw.
15.5.2
Restoring the chassis
Connect the cables to the operation panel.
Reinstall the PSU backplane unit in its original position and then tighten the
two screws.
Reinstall the fan shelf and then tighten the two screws in the fan slot.
Reinstall the power supply unit in its original position.
Install all the fan units.
Note -
Install the front cover.
Note -
Insert the CPU memory unit into the chassis.
Raise the right and left levers of the CPU memory unit and then tighten the
one screw.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ・ February 2014
292