Removing The Operation Panel - Fujitsu SPARC M10-4 Service Manual

XSCF> showlogs error
Confirm the hardware and software configurations.
Stop the entire system.
Execute the replacefru command to release the chassis requiring maintenance
from the system.
XSCF> replacefru
Remove all the power cords from the PSU backplane unit of the chassis
requiring maintenance.
Note -
15.4

Removing the Operation Panel

Caution -
15.4.1 Accessing the operation panel
Check the BB-ID switch on the operation panel and record the BB-ID set for
the chassis requiring maintenance.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ February 2014
288