Hypervisor : 0.21.3
XSCF : 02.01.0001
CMU BACKUP
#0: 02.01.0001
#1: ..
XSCF>
Execute the showlogs command to confirm that the system is operating
normally.
XSCF> showlogs error
Execute the testsb command to confirm that the CPU memory unit requiring
maintenance is normally recognized.
XSCF> testsb -v -y -s 00-0
Execute the showstatus command to confirm that the CPU memory unit is
operating normally after maintenance.
XSCF> showstatus
Execute the showhardconf command to check the hardware configuration
and the status of each component.
XSCF> showhardconf
Execute the showdate command to confirm the XSCF time.
XSCF> showdate
If the XSCF time is different from the current time, execute the setdate
command to set the time.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ・ February 2014
164