Fujitsu SPARC M10-4 Service Manual page 432

27.3 Enabling the Removal of an XSCF
DUAL Control Cable
■
■
■
■
Caution -
27.3.1 Active/Hot maintenance
Open the rack door.
Log in to the XSCF shell.
Execute the showlogs command to identify the component requiring
maintenance.
XSCF> showlogs error
Confirm the hardware and software configurations.
Execute the switchscf command to switch the master XSCF to a standby
XSCF.
XSCF> switchscf -t Standby
Execute the replacefru command to release the XSCF unit of the crossbar box
requiring maintenance from the system.
XSCF> replacefru
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ February 2014
408