Fujitsu SPARC M10-4 Service Manual page 226

10.3 Enabling the Removal of a Power
Supply Unit
Note -
■
■
■
■
Caution -
10.3.1 Active/Hot maintenance
Note -
Open the rack door.
Log in to the XSCF shell.
Execute the showlogs command to identify the component requiring
maintenance.
XSCF> showlogs error
Confirm the hardware and software configurations.
Execute the replacefru command to release the power supply unit requiring
maintenance from the system.
XSCF> replacefru
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ February 2014
202