Fujitsu SPARC M10-4 Service Manual page 187

XSCF> diagxbu -y -b 00 -t 01
Execute the restoreconfig command to restore the XSCF setting information
only when the CPU memory unit lower in a singe-chassis configuration has
been replaced.
Log in to the XSCF shell.
Note -
Execute the restoreconfig command to restore the XSCF setting
information that has been saved with the dumpconfig command.
M10 Systems System Operation and Administration Guide
XSCF> restoreconfig
Execute the version command to confirm the firmware version information.
Systems System Operation and Administration Guide
XSCF> version -c xcp -v
BB#00-XSCF#0 (Master)
XCP0 (Current): 2011
CMU : 02.01.0001 (*1)
POST : 1.20.0
OpenBoot PROM : 4.34.0+1.2.0
Hypervisor : 0.21.11
XSCF : 02.01.0001
XCP1 (Reserve): 2011
CMU : 02.00.0006 (*2)
POST : 1.13.0
OpenBoot PROM : 4.34.0+1.0.5
設定情報を復元する
Fujitsu M10/SPARC M10
Chapter 7 Maintaining the CPU Memory Units
にログインする
Fujitsu M10/SPARC
163