Removing A Power Supply Unit - Fujitsu SPARC M10-4 Service Manual

Hide thumbs Also See for SPARC M10-4:

Table of Contents

XSCF> showlogs error

Confirm the hardware and software configurations.

Power off all the physical partitions.

Execute the replacefru command to release the power supply unit requiring

maintenance from the system.

XSCF> replacefru

Remove all the power cords from the power supply unit of the crossbar box

requiring maintenance.

Removing a Power Supply Unit

While pushing the lever (A in the figure) of the power supply unit, hold the

handle (B in the figure) and pull out the power supply unit.

Chapter 18　Maintaining the Power Supply Units of the Crossbar Box

Sparc m10-4s