Installing The Fan Backplane - Fujitsu SPARC M10-4 Service Manual

Figure 22-7
Remove the fan backplane.
Note -
22.5

Installing the Fan Backplane

22.5.1 Installing the fan backplane
Fit the fan backplane into the right- and left-hand notches in the fan shelf.
Install the bracket of the fan backplane and secure it with two screws.
Connect the two cables to the fan backplane.
Support the fan shelf from below with one hand and then insert it carefully
into the chassis.
Tighten the three screws securing the fan shelf.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ February 2014
356
A