Stopping The System From The Operation Panel; Accessing Components; Lowering The Cable Support - Fujitsu SPARC M10-4 Service Manual

Note -
5.4.2

Stopping the system from the operation panel

Switch the mode switch on the operation panel to Service mode.
Note -
Press the power switch on the operation panel for 4 seconds or more.
Note -
Check that the POWER LED on the operation panel is off.
Note -
5.5

Accessing Components

5.5.1

Lowering the cable support

Loosen the right and left screws fixing the cable support, and unlock it by
pulling the upper and lower metal fittings towards you (in the direction of the
arrow).
Chapter 5 Understanding the Preparations for Enabling Maintenance 65