Fujitsu SPARC M10-4 Service Manual page 124

Figure 7-7
Lower the cable support.
Remove all the cables connected to the external interface on the rear of the
chassis.
■
■
■
■
■
■
■
■
■
Note -
Remove all the PCIe card cassettes.
Note -
If any crossbar units are mounted, remove them.
Loosen the three screws holding the mounting frame and then remove it.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ February 2014
100