XSCF> switchscf -t Standby
The XSCF unit switch between the Master and Standby states.
Continue? [y|n] : y
Log in to the XSCF again.
Execute the showpparstatus command to confirm the operating condition of
the physical partition.
XSCF> showpparstatus -p 0
PPAR-ID PPAR Status
00 Running
Execute the showdomainstatus command to confirm the operating condition
of the logical domain.
XSCF> showdomainstatus -p 0
Logical Domain Name Status
primary Solaris running
guest0 Solaris running
guest1 Solaris running
domain01 Solaris running
Connect to the control domain console of the physical partition.
Execute the ldm list-domain command to confirm the operating condition of
the logical domain.
# ldm list-domain
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- UART 14 8G 64% 2h 54m
guest0 active -n---- 5000 16 8G 42% 2h 54m
guest1 active -n---- 5001 16 8G 11% 2h 54m
domain01 active -n---- 5002 16 8G 7.3% 2h 54m
Execute the ldm list-devices -a command to check the usage status of the
resource.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ・ February 2014
58