Installing The Cpu Memory Unit In The Chassis; Restoring The Chassis - Fujitsu SPARC M10-4 Service Manual

7.7.2

Installing the CPU memory unit in the chassis

Install the CPU memory unit upper or a filler unit for a CPU memory unit
upper.
Insert the CPU memory unit into the chassis while supporting it from below
with one hand.
Raise the right and left levers of the CPU memory unit to secure it.
Note -
7.7.3

Restoring the chassis

If a crossbar unit was mounted, install the mounting frame and then tighten
the three screws.
If any crossbar units were mounted, reinstall all of them.
Install all the PCIe card cassettes.
Note -
Connect all the cables for the external interface.
■
■
■
■
■
■
■
■
■
Chapter 7 Maintaining the CPU Memory Units 157