Table of Contents
Advertisement
6
Power supply unit (PSU)
6.1
Safety notes
CAUTION
▶
Do not disassemble the PSU. Doing so may cause electric shock.
▶
Areas around the PSU may remain extremely hot after shutdown.
After shutting down the server, wait for hot components to cool
down before removing the PSU.
▶
When installing a PSU, ensure that the connector of the PSU is not
damaged or bent.
▶
The PSU is heavy, so handle it carefully. If you drop it by mistake,
injuries may result.
▶
For more information, see
6.2
Basic information
AC PSU
The server is equipped with four hot-plug PSUs that adjust automatically to any
mains voltage in the range from 200 V - 240 V.
If one PSU fails, the other PSUs ensure that operation can continue
uninterrupted and the defective PSU can be replaced during operation (hot-
plug).
CAUTION
The server automatically adjusts to a mains voltage in the range from
200 V - 240 V.
▶
You may only operate the server if its rated voltage range
corresponds to the local mains voltage.
GX2570 M6
"Important information" on page
Upgrade and Maintenance Manual
25.
79
Advertisement
Table of Contents
