Fujitsu SPARC M10-4 Service Manual page 274

# grep " 0 \"ixgbe"\" /etc/path_to_inst
"/pci@8100/pci@4/pci@0/pci@0/network@0" 0 "ixgbe"
For a SAS card or Fibre Channel card
# ldm list-bindings rootdom
------------------------ Ommitted ------------------------
VDS
NAME VOLUME OPTIONS MPGROUP DEVICE
vds0 vol0 /export/
vdisks/vdisk.img (*1)
vol1 /dev/zvol/
dsk/rpool/zvdisk1
vol2 /dev/dsk/
cxtxxxxxxxxxxxxxxxxdxsx
CLIENT VOLUME
vdisk1@guest1 vol0 (*2)
vdisk2@guest2 vol1
vdisk3@guest3 vol2
------------------------ Ommitted -----------------------
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ February 2014
250
If the virtual network switch to which the PCIe card requiring maintenance
is assigned is found in steps a and b, see the [PEER] part of the virtual
network switch displayed in step a. Confirm the part for the virtual network
device and guest domain that use the services of the virtual network
switch.
Execute the ldm list-bindings command from the control domain to check
virtual disk service [VDS] information for the virtual disk backend
([DEVICE] value) that is assigned to the virtual disk service.
Guide
Log in to the logical domain to which the PCIe card is assigned to identify
the physical disk from the backend. Then, identify the PCIe card in use
from the physical disk.
case, execute the zfs list command to confirm the ZFS storage pool corresponding
zpool name
virtual network device
Oracle VM Server for SPARC Administration
guest domain