Stopping The Entire System - Fujitsu SPARC M10-4 Service Manual

XSCF> poweroff -p 0
PPAR-IDs to power off:00
Continue? [y|n] : y
00 : Powering off
Execute the showpparstatus command to confirm that the power to the
physical partition is turned off.
XSCF> showpparstatus -p 0
PPAR-ID PPAR Status
00 Powered Off
Switch the mode switches for the master chassis and those chassis whose
XSCFs are in the standby state to Service mode.
5.4

Stopping the Entire System

■
■
Note -
Note -
Stop the entire system.
Execute the showpparstatus command to confirm that the power to the
physical partition is turned off.
For a building block configuration (without crossbar box)
For a building block configuration (with crossbar box)
Chapter 5 Understanding the Preparations for Enabling Maintenance 63